1. A single Microsoft Word file (unzipped) via the Moodle course web site. Details about the online submission process required for this

assessment item are available from the course website.

2. A plain text file named snort.conf which contains your SNORT rules in answer to Question 1.
3. A copy of your message.txt, extra_logo.png, COIS23001Ass2.sig and ass2sig.jpg files from Question 4.
4. A copy of mydetails.txt.asc file from Question 5

Question 1:
Snort Rules (10 Marks)

This question presents a fictitious security vulnerability in a range of lasers printers. The question requires that you develop SNORT IDS rules

to detect exploits of this fictitious vulnerability. All information regarding this vulnerability is fabricated to give the illusion of a real

security threat. As a result, searches on the Internet will not yield any information regarding the signature of this vulnerability. All the

information required to detect exploits for this vulnerability are presented in this question, except where noted otherwise.
You are a security specialist working for XYZ Incorporated. XYZ use SNORT as their NIDS which protects both their IP sub-networks being and

A security vulnerability has been detected in the Humphrey Pollard Laserprint 12050 printer model. This vulnerability is remotely exploitable and

allows the execution of arbitrary code.

There is a bug in the way the printer processes the postscript spool management header. A sample of a spool header is given below:

%!PS-Adobe-3.0 %%Creator: texttops/CUPS v1.2.2%%CreationDate: Thu 21 Sep 2006 11:49:57 AM EST%%Title: TODO %%For: username %

%DocumentNeededResources: font Courier-Bold …
The printer’s code which parses these headers only allows 8 bytes for the “%%For” field value buffer in memory. In the example above, the field

value is “username”. It is possible to overflow the buffer by providing a value to the “%%For” field that is greater than 8 bytes. The “%%For”

field can be found anywhere in the packet.

An exploit has been released in the form of a worm which when infecting the Laser printer’s memory, tricks the laser printer into emailing all

documents received for printing to an email account in Russia. The worm propagates by scanning networks in proximity of its own for other

vulnerable printers. On finding vulnerable machines, it copies itself to them and the cycle continues.

It also propagates via email as a PDF attachment. The malicious code is embedded in the PDF file. The email message suggests that the attached

document contains a joke and requires printing to a laser printer to view. When the user prints the PDF, its payload is sent to the printer

either directly, or via a printer spooling server. Effectively, this means the worm can attack printers from any host on the network.

If a printer is found to be compromised, power-cycling (turning off and then on) the printer will erase the worm from the printer’s volatile

memory. However, this does not prevent the printer from being re-infected.

You are required to write 2 SNORT IDS rules labeled (a) and (b) to manage this vulnerability until patches are applied and printers reset. Rule

(a) must detect attempts to exploit this vulnerability on any printer in the company network. The rule should scan for attempts from any host on

the network to any host on the network. It should also scan only for connections to the Jetdirect printing TCP/IP port number, used by this range

of printers. You may need to research Jetdirect to identify which port number it uses for printing and what transport protocol. Google is a good

place to start.

The signature of the exploit is given as follows:
%%For: username
The value “username” can be any sequence of characters, but must be exactly 8 characters long. For example, “username” could be “abcdefgh”. Note

also there is a space between the colon and “username”. Immediately following the 8 characters for the username is the payload of the exploit,

which is given below as decimal byte values:
124 185 30 135 99 214 51 29
Your rule should match the entire sequence as described above starting from “%%For:” through to the last decimal byte of the exploit payload “29”.

On detecting packets, your rule should generate an alert with a message stating: “Attempt to exploit laser printer vulnerability”.

Rule (b) must detect attempts by the malicious payload running on any infected printers to email documents to the Internet.

You have 6 printers on your network that are vulnerable to this attack. Their IP addresses are:

Your email rule must apply only to the vulnerable printers on the network. In other words, your rule should detect attempts to email the hacker

from only the above printers, and no other hosts.

This model of laser printer also provides scanning and faxing capabilities. When the scanning function is used, the unit will email the scanned

document to an Internet email address given by the user when scanning. As a result, it is normal behaviour for these printers to send emails via

SMTP. Therefore, it is necessary to check the recipient email address of the document. The rule should detect attempts to email users outside of

the organisation, as no document should be emailed outside the company from a printer. The organisation’s domain name is: xyzcorp.com.au. So any

emails sent to an address of form: user@xyzcorp.com.au should not be detected as these addresses are for company employees. Any other email

addresses without the exact domain name above should be detected. Any mail server could be used to deliver the email. On detecting an email from

one of these printers to an address outside the organisation, your rule should generate an alert with the message: “Compromised printer attempting

to email document outside organisation”

For both rules, be sure to complete the following.

1. Allocate an appropriate SID value and a revision number

2. Designate an appropriate class type for this attack.

3. Annotate your rules with comments describing what each component of the rule does, so other security specialists in your team can see how

your rules are written. Comments can be introduced to your rules file snort.conf by preceding each line with a hash character “#”. Anything

after the hash character to the end of the line will be treated as a comment by SNORT and ignored by the rule parsing code. This is how you

should comment your rules.

An example of how to present your rules in your assignment document is shown below:

# Your explanation of the below in italics
# Your explanation of the below
drop udp $EXTERNAL_NET any -> $HOME_NET 993
#Your explanation of the below, and so on…

An example explanation for a SNORT rule option:

# The content of the packet must contain the string “USER root” to be matched.
# Furthermore, the offset option specifies that the string “USER root” should be
# matched exactly 10 bytes from the beginning of the packet. In other words, it will
# only match packets where 10 bytes from the start of the payload, the string
# “USER root” is specified.

content: “USER root”; offset:10;

Testing your rule
A pcap dump file has been provided which includes the signatures for both the laser printer exploit, and the email messages that are sent from

infected printers. This file serves two purposes. Firstly, it allows you to analyse the format of normal and malicious packets. Using Wireshark,

you are able to open the pcap dump file, look at the format of the packets, and search for the malicious ones using the information in this

document. Secondly, the pcap dump file can be used with SNORT to test your rules. To do the above, you need have installed SNORT and Wireshark

on your home computer.

Instructions on how to obtain these applications are available on the course website under the “Software Resources” section.

To test your rule with SNORT, copy the sample.pcap file to a working folder on your computer. In this same folder, create a sub-folder called

“logs”. Open up notepad and save an empty file in your working folder called “snort.conf”. This file will contain your rules. As you change the

rules in notepad, resave the file. Now to test your rule using SNORT, you execute the SNORT program from a command window as follows:

c:snortbinsnort.exe –r sample.pcap –c snort.conf –l log

(This is an example – your install location for SNORT may differ. Note also this is a windows example – you may use Linux or OS X to complete

this assignment).

Check the output of the alert.ids file to see which packets have been detected by your rules. Also check the packet dump files as generated by

SNORT using Wireshark which give the full packet content that were detected by your rules. They are the files named “snort.log.{number}” where

{number} is the timestamp value of when you ran SNORT. This provides a history of each time you execute SNORT. The greatest number is the newest

version. You can drag these files from explorer window onto the Wireshark window. Also, alerts are appended to the end of your alert.ids file each

time you execute SNORT. So just a hint: before you run SNORT each time to test your rules, delete the alerts file and the dump files so it is

less confusing. Otherwise, they can be hard to read. Reviewing these logs files are essential to helping you to identify where you have gone

wrong with your rules.

Your alert.ids file should contain the following:
[**] [1:1000022:1] Attempt to exploit laser printer vulnerability [**]
[Classification: <>] [Priority: 1]
09/21-11:49:57.965425 ->
TCP TTL:64 TOS:0x0 ID:39862 IpLen:20 DgmLen:782 DF
***A**** Seq: 0x31A554DB Ack: 0xFCFF2DD Win: 0xB7 TcpLen: 32
TCP Options (3) => NOP NOP TS: 23973781 489101

[**] [1:1000022:1] Attempt to exploit laser printer vulnerability [**]
[Classification: <>] [Priority: 1]
09/21-11:50:13.094991 ->
TCP TTL:64 TOS:0x0 ID:44774 IpLen:20 DgmLen:782 DF
***A**** Seq: 0x322170AB Ack: 0x100D84CB Win: 0xB7 TcpLen: 32
TCP Options (3) => NOP NOP TS: 23977563 489132

[**] [1:1000021:1] Compromised printer attempting to email document outside orga
nisation [**]
[Classification: <>] [Priority: 2]
09/21-14:57:32.058922 ->
TCP TTL:128 TOS:0x0 ID:65489 IpLen:20 DgmLen:70 DF
***AP*** Seq: 0xFC0CF9C8 Ack: 0x32CC7240 Win: 0xFE7D TcpLen: 20

[**] [1:1000021:1] Compromised printer attempting to email document outside organisation [**]
[Classification: <>] [Priority: 2]
09/21-15:02:40.010228 ->
TCP TTL:128 TOS:0x0 ID:5281 IpLen:20 DgmLen:70 DF
***AP*** Seq: 0x9B7E2E43 Ack: 0x463DFBEF Win: 0xFE7C TcpLen: 20

Note: The classification identifer has been deleted. If your alert.ids file is different to the above, you have false positives or false

negatives. This means your rule is not specific enough, or is too specific. Identify which alerts are incorrect in your file and open the

snort.log.{number} dump file to view their contents to see where you have gone wrong. If you are missing alerts, then identify the timestamp in

the alert.ids file given above and search for the same packet in the sample.pcap file using Wireshark. Instructions on how to do this using

Wireshark are given below in the tips section.


• Search for the SMTP RFC document “RFC0821” via google. In particular, you will need to familiarise yourself with the “RCPT TO:” SMTP

command. This is the format you need to check for to detect safe receiving email addresses.

• Use Wireshark to analyse the pcap dump file. You can identify which packets contain the exploit by using the “Edit” menu, and “Find

Packet” option. You can specify a String value and search in the “Packet bytes” to find the signatures of the vulnerability.

• Make use of SNORT to test your rule. Check the output from your alerts file with what is provided in this document to see if you have

implemented your rule properly. In particular, check for false positives, and false negatives.

• The alert.ids file generated by SNORT on execution will provide the headers of the packets that were detected by your rules. If you wish

to see the full contents of these packets, you can search for them in the pcap dump file using Wireshark. The headers of the packet in the

alert.ids file include the timestamp when the packet was captured. You can search for the exact timestamp in the pcap file to find the same

packet. This can be done by changing the settings of Wireshark to show the absolute time of the packets, rather than an offset from the very

first packet. Then if you wanted to find the packet in the alert.ids file with the timestamp: “11:49:57.965425”, you would search for the same

string in Wireshark. To change the display format for the timestamp in Wireshark:

1. Click “View” menu
2. Click “Time display format” option
3. Click “Time of day”

• Certain characters are “special” in SNORT rules. These characters must be escaped to tell SNORT to treat them literally, rather than

interpret their special meaning. To escape a special character, you simply precede it with a back-slash “”. For example, if you wish to

continue your rule on a new line in the configuration file, then you end the line with a “” character to escape the special meaning of the ENTER

character at the end of the line. SNORT treats the ENTER character as special. It means it is the end of the current rule. With a “” at the end

of the line, it tells SNORT to treat it as a literal ENTER which will be interpreted as just spacing for your rule and allows it to continue on

the next line. If you receive the following error when you attempt to run your rule through SNORT: “ParsePattern Got Null enclosed in quotation

marks (“)!”, then you have a special character in your rule content that needs to be escaped. Refer to the SNORT documentation website for

details on which characters have special meanings.

• Research how to express a group of unrelated individual IP addresses as a source or destination.

• Make sure you include the classtype in your rule. Refer to the SNORT documentation to determine which classtype is appropriate for this

exploit as described above. You will probably have to make use of the classification.config file (located in the Snortetc directory) –

research how to make reference to this file from your rules file.

• Failure to use the correct syntax in your rule will mean the rule is ineffective. This means you will lose marks on this question.

• Refer to the Snort manual for assistance in writing the rules – a link to the manual is availed from the Software Resources section of the

course web site.

Note: Duplicating the contents from the text, lecture slides, weekly notes or the Internet is not acceptable (even if it is referenced) and will

not attract any marks. Your solutions must be written in your own words. If you cannot write your answer in your own words, then you have not yet

mastered the topic and require further reading or advice from your tutor. Any information taken from an external source (either from the textbook

or any other source) must be referenced appropriately. Failure to do so constitutes plagiarism.
Question 1 Marking Criteria
There is a total of 5 marks for each of the two rules. 2.5 marks for commenting, and 2.5 marks for rule correctness explained below.
Commenting criteria:
• 2.5 marks
A very good, in depth explanation of the SNORT Rule. Shows good understanding of the material
• 2 marks
Has a few misunderstandings or explanations
• 1 – 1.5 marks
Passable explanations, a few mistakes, some major and not very descriptive
• 0.5 marks
Major problems. Does not demonstrate a good understanding of the material or solution is very vague
• 0 marks
Essentially nothing correct or solutions have been copied verbatim from other sources

SNORT rule correctness criteria:
• 2.5 marks
A correct, concise SNORT rule that identifies malicious packets, without false positives or false negatives, and adheres to the assignment

specification fully
• 1.5 – 2
marks A few mistakes, but still essentially correct and does not contain syntax errors
• 0 – 1 marks
Does not meet the specifications, has false positives/false negatives, or syntax errors

Question 2:
Kerberos Authentication Protocol (10 Marks)
Kerberos is one of the most secure authentication protocols being used today. The Kerberos authentication protocol is very briefly described on

page 280 in Chapter 8 of the Ciampa textbook. You are required to do personal research to complete the following questions regarding this topic:

A. Give your general description of the Kerberos authentication protocol.

B. Explain the term: Authenticator used in the Kerberos authentication protocol.

C. In the Kerberos authentication protocol, there are 3 basic roles: client, server and Key Distribution Centre (KDC). Give your description

of each of them.

D. By explaining the term: Session Ticket, describe how a session key is created by KDC, and distributed to the client and the server

E. Describe the mutual authentication procedure between the client and the server after the client obtains the session ticket

To answer these questions, you should consult reference materials from other texts and the Internet. You are required to reference these sources

– DO NOT DIRECTLY COPY material from them – i.e. use your own words.
Question 2 Marking Criteria

There is a total of 10 marks available for this question. Each question (A – E) is worth 2 marks. A question that is addressed thoroughly will

score 2 mark – a lesser mark will be awarded if material is missed or the answer is unclear. 0 Marks will be awarded if the answer is copied

directly from sources (i.e. isn’t in your own words).

Question 3:
Wireless Protocols (10 Marks)

WPA2 Enterprise security is an integral component of modern network infrastructure. AES/CCMP encryption and 802.1x authentication is currently

regarded as the best way of securing enterprise-level wireless networks. You are required to do personal research to complete the following

questions regarding this topic:

A. Describe 802.1x authentication and the steps that when a wireless client connects to a network using RADIUS server for authentication.

B. Explain the PEAP protocol – how does it differ from EAP and what EAP deficiency does it address?

C. What makes a brute-force attack both particularly difficult and potentially easy on a wireless network using AES/CCMP encryption and

802.1x authentication? Hint: What do you need to know in order to attempt the attack?

D. Assume an office wireless network was only configured with WPA2-AES encryption (i.e. no additional authentication standards). What

problems would this cause?

E. Assume an office wireless network was only configured with 802.1x authentication (i.e. no additional encryption). What problems would

this cause?

To answer some of these questions, you should consult reference materials from other texts and the Internet. You are required to reference these

sources – DO NOT DIRECTLY COPY material from them – i.e. use your own words.

Question 3 Marking Criteria

There is a total of 10 marks available for this question.
Question A – 3 Marks
Question B – 3 Marks
Question C – 2 Mark
Question D – 1Mark
Question E – 1 Mark

A question that is addressed thoroughly will score full marks – a lesser mark will be awarded if material is missed or the answer is unclear. 0

Marks will be awarded if the answer is copied directly from sources (i.e. isn’t in your own words).
Question 4: Steganography Exercise [10 Marks]

This exercise requires you to use Steganography to embed secret text into a graphic file and also to embed a secret watermark into a second

graphic file. To accomplish these tasks you are to download a copy of OpenStego from the internet. You will also need to download the two graphic

files cqu_logo.png and Bundaberg.jpg from the Moodle site.
a) Data Hiding in a graphic file [5 Marks]
You are to create a “message.txt” file containing the text “This is my hidden text file” to use as your Message File in OpenStego.

You are to use “cqu_logo.png” as your Cover File in OpenStego and “extra_logo.png” as your Output Stego File.

Note: You MUST use your student number (sxxxxxxx) as the password .

You are to include both your message.txt and extra_logo.png files in your assignment submission.

b) Watermarking a second graphic file [5 marks]
You are to generate a signature file (“COIS23001Ass2.sig”) using “Copyright 2015,COIS23001” as the PassPhrase.

You can now embed your watermark in the “Bundaberg.jpg” graphic file to create your Output file called “ass2sig.jpg”.

You are to submit a copy of your COIS23001Ass2.sig ass2sig.jpg with your assignment submission.
Note: You MUST include a copy of your message.txt , extra_logo.png, your COIS23001Ass2.sig and ass2sig.jpg files with your assignment submission.

Question 4 (a) Marking Criteria
1.5 marks for correct message.txt, 1.5 marks for correct password, 2 marks for correct extra_logo.png file.

Question 4 (b) Marking Criteria
2 marks for correct signature file, 3 marks for correct output file.

Question 5 10 marks

You are the Chief Information security Officer (CISO) of a small medium sized – accounting Services Company. In the last few weeks, senior staff

have been complaining that some confidential information has been disclosed via email without any authorisation. You are approached by the Chief

Information Officer (CIO) to discuss the issue and see the most appropriate way to tackle this problem. You suspect that some of the employees

might be using their technical skills to access sensitive information either from the mail servers or during transmission. To counteract this

malpractice, you suggest the CIO the implementation of encryption. Before you actually implement the system, you want to conduct a pilot using the

GNU Privacy Guard (GPG) software.

The pilot requires that you install GNU Privacy Guard (GPG) software onto your own computer and complete the following activities.

Note: The GNU Privacy Guard is available for free download from http://www.gnupg.org/ and “A Practical Introduction to GNU Privacy Guard in

Windows” by Brendan Kidwell is available at http://www.glump.net/howto/gpg_intro
After installing GPG software onto your own computer, complete the following tasks:

1. Generate your own key-pair by using GPG software and do not create a pass-phrase for your private key (in a real world this is not a good

practice. Just for the sake of this assignment, do not create a pass-phrase). You need to use screen-shots to show that you have successfully

completed this task. A valid screen-shot is similar to the one shown in Figure 1. Pay attention to the red circles, which demonstrate the success

of key pair generation ( 2 marks).
Figure 1 Key Pair Creation

2. Export your public key and paste it into your assignment document. You need to use two screen-shots to show that you have successfully

completed this task. One screen-shot is to show the use of gpg command and the other is to show the exported public key. For example, the screen-

shot in Figure 2, shows a public key, which is exported into the file: CC-pubkey.txt (2 marks).
Figure 2 Screen-shot of a Public Key

3. Explain the steps how to import your Lecturer’s public key from the key-server http://pgp.mit.edu (your lecturer created a public key and

stored it at the MIT PGP Public Key Server). Include in the assignment document the gpg command line, individual options you used and their

meaning. As above, use screenshots of website interactions, with accompanying explanations of the screenshots to explain the steps how to import

your Lecturer’s public key from the key-server http://pgp.mit.edu (3 marks).
4. Create an ASCII text file to store your full-name, your student number, and your student CQU email address (please do not use any other

email address). Then using your lecturer’s public key, encrypt this text file. The resulting file should also be ASCII armored so that it is

readable once decrypted by your lecturer / tutor. Failure to do so will result in loss of marks. Submit the resulting encrypted file along with

your assignment solutions document (word document) via the online submission system and following the naming convention given above (3 marks).

An example explaining the steps to export a key
Here is a specific example for explaining the step of exporting a private key, to be imported onto another computer running GPG. Use this example

to guide you in how to give explanations in this question.
To export your private key, you need to execute the following gpg command:

gpg –output “privkey.txt” –export-secret-keys “Xiao Li”

The output option specifies the filename in which to write the private key into. Finally, the export-secret-keys option specifies the name of the

private key to be exported. The name is given as “Xiao Li”. This option is distinct from the “export” option which exports only public keys.
Now the private key is stored in the file “privkey.txt” unencrypted and can be imported into another version of GPG.

Where required be detailed and specific about your actions explaining exactly what you did, and why you did not. Document the exact GPG commands

you have used, and provide an explanation of what the command does, including the individual command line options, and/or provide screenshots of

any interactions with websites.
Brendan Kidwell’s practical guide is not the only one available on the Internet. There are plenty of other documents on the Internet that explain

how to use GPG for various functions.

2 Marks for key-pair creation
2 Marks for exporting your public key
3 Marks for explaining the steps how to import your Lecturer’s public key from the key-server
3 Marks for creating an ASCII text file and encrypting it using your lecturer’s public key

Place this order with us and get 18% discount now! to earn your discount enter this code: summer17 If you need assistance chat with us now by clicking the live chat button.